Guide · Landlords and property managers · 3 min read · Updated 17 November 2026
How to Secure an Empty Property: A Guide for Owners and Landlords
Short answer
To secure an empty property, check your insurer's unoccupied property conditions, remove valuables and anything flammable, drain down water where appropriate and arrange regular inspections. Fit perforated steel security screens to vulnerable windows and steel doors to entrances, typically hired from around £25 per screen per week plus fitting. Board any broken openings immediately, because visible damage invites further break-ins.
Why empty buildings attract trouble
A vacant building is vulnerable in ways an occupied one is not. Nobody notices a forced back door for days. Copper pipes, boilers, cables and lead flashings are worth stealing. Squatting in residential buildings is a criminal offence in England and Wales, but commercial buildings are treated differently, and removing occupiers from any building takes time and money. Vandalism and fire are also more likely when a building looks neglected.
The aim of empty property security is to make the building look cared for and hard to get into. That combines physical protection on doors and windows with routine checks, removal of temptation and quick repair of any damage, so that a single broken pane does not become an invitation.
Check the insurance conditions first
Most home and commercial insurance policies change once a building has been unoccupied for a set period, often around thirty or sixty days. Cover for theft, malicious damage or escape of water may be reduced or excluded, and insurers commonly impose conditions such as weekly inspections, draining down the water system, turning off non-essential services and securing all doors and windows. Some specify particular security measures.
Read the policy and tell the insurer the property is empty. Failing to meet the conditions can leave you uninsured for exactly the losses most likely to happen. Specialist unoccupied property insurance is available where a standard policy will not continue cover.
- Tell your insurer the property is unoccupied.
- Check required inspection frequency and record each visit.
- Drain down water and turn off non-essential services if required.
- Confirm any specified security measures before choosing them.
Physical security options
Perforated steel screens are the most common protection for vacant buildings. They are bolted into the window reveals with fixings that are hard to undo from outside, they let light and air through to limit damp, and they do not burn. Steel security doors with robust locks replace or cover existing doors and allow agents and contractors controlled access. Both are usually hired by the week.
For shorter vacancies, or upper floors that cannot be reached easily, well-fixed exterior plywood may be enough. Whatever is used, it should be fitted neatly, kept free of graffiti where possible and checked at every inspection.
| Measure | Typical 2026 cost | Notes |
|---|---|---|
| Steel window screens | from £25 per screen per week | Plus installation and removal; minimum hire often applies |
| Door boarding or temporary security door | £150–£400 | For forced or vulnerable doors |
| Plywood boarding, first window, daytime | £120–£220 | Short-term or low-risk openings |
| Additional windows, same visit | £50–£120 each | Depends on size and height |
Routine checks and maintenance
Visit regularly and at varied times. Walk the whole outside, check every screen, door and boarded opening for tampering, and look inside for leaks, damp, signs of entry and post building up behind the door. Remove junk mail and free newspapers, which are a clear sign of vacancy. Keep gardens and frontages tidy, and clear rubbish that could be set alight.
Record each inspection with the date, time and photographs, because insurers may ask for evidence. If damage is found, get it secured the same day. A boarded window that is quickly repaired tells anyone watching that the building is being looked after.
Fire, waste and access considerations
If any part of a non-domestic building remains in use, the Regulatory Reform (Fire Safety) Order 2005 applies in England and Wales and security measures must not block fire exits or escape routes. Discuss this with the security provider before screens and doors go on. In wholly vacant buildings, removing combustible waste and furniture reduces the fire risk considerably.
Waste from commercial premises, including broken glass, old boarding and cleared contents, is controlled waste. Anyone you pay to remove it should hold a waste carrier registration with the Environment Agency, or the equivalent body in Scotland, Wales or Northern Ireland, and you should keep the waste transfer paperwork.
Preparing the building before it goes empty
The best time to secure a vacant property is the day the last occupant leaves, not after the first break-in. Walk round with the security provider and agree which openings need screens, which doors need steel doors and how keys will be held. Take photographs of the condition of every room so any later damage can be identified and claimed for. Take meter readings and tell the utility suppliers.
Remove anything of value, including portable appliances, tools and stored materials, and clear combustible rubbish from inside and around the building. Arrange for post to be redirected so it does not pile up. If the building is in a flat block or terrace, tell neighbours how to report problems to you, because they are often the first to notice an open door or a light that should not be on. These steps cost little and make every other security measure more effective.
- Agree the screen and door schedule before the property is vacated.
- Photograph every room and take meter readings.
- Remove valuables, tools and combustible rubbish.
- Redirect post and give neighbours a way to report problems.
Questions people also ask
How long do steel screens usually stay up?
As long as the property is empty. Screens are commonly left in place for weeks or months during probate, sales, refurbishment planning or redevelopment. Hire is usually charged weekly from around £25 per screen, so for long vacancies it is worth agreeing the hire terms, minimum period and removal charge at the outset.
Do I need to board every window on an empty house?
Not always. Ground-floor windows and doors, and any upper windows reachable from flat roofs, walls or extensions, are the usual priorities. Your insurer's conditions and the local risk should guide the decision. Any window that is already broken should be secured straight away, whatever its position.
Are screens better than an alarm for an empty building?
They do different jobs. Screens and steel doors physically delay entry, while an alarm or monitored camera system raises the alert when someone tries. On higher-risk vacant buildings, owners often use both. Whatever you choose, regular inspections remain essential and are often an insurance condition.
Written and checked by the Emergency Boarding Up team. Read our editorial policy.
More guides
How Much Does Emergency Boarding Up Cost in the UK? 2026 Prices
A daytime emergency call-out with one domestic window boarded typically costs £120–£220 in the UK in 2026, rising to £180–£350 at night, weekends and…
What to Do After a Break-In: A Step-by-Step Checklist
After a break-in, make sure nobody is still inside, then report it to the police and get a crime reference number. Photograph the damage before…
Plywood Boarding vs Steel Security Screens: Which Do You Need?
Plywood boarding is the right choice for short-term emergency securing after a break-in or storm, costing from £120–£220 for a single window. Clear…
How to Make a Broken Window Safe Until It Can Be Replaced
To make a broken window safe, keep people and pets away, wear thick gloves and eye protection, and remove only loose shards you can reach from the…
Get a free emergency boarding up quote
Tell us what you need and we'll come back with a clear price.
Request a quote