Guide · Landlords and property managers · 4 min read · Updated 17 November 2026
Plywood Boarding vs Steel Security Screens: Which Do You Need?
Short answer
Plywood boarding is the right choice for short-term emergency securing after a break-in or storm, costing from £120–£220 for a single window. Clear polycarbonate keeps light and visibility while glass is replaced. Steel security screens, hired from around £25 per screen per week plus fitting, are better for buildings standing empty for weeks or months, because they resist removal, fire and vandalism far better than timber.
Plywood boarding
Exterior-grade plywood is the standard emergency material. It is quick to cut to size on site, strong enough to stop casual entry when fixed properly into the frame or reveal, and inexpensive. Most boarding teams carry several sheets on the van and can secure a typical domestic window in under an hour, including clearing the broken glass. For shopfronts, sheets are fixed to a timber frame so a large opening can be covered without relying on the damaged glazing.
Plywood has clear limits. It blocks all light, so a boarded room feels gloomy, and from the street it signals that something has happened. Determined intruders can lever or saw it off, and it burns. It suits situations where the boarding will be in place for days or a few weeks while permanent glass or doors are made.
Polycarbonate temporary glazing
Clear polycarbonate sheet is a middle option. It is far tougher than glass, lets light in, and can be fixed over or into a window opening in much the same way as plywood. For a family home where a living room window will take a week or two to replace, it keeps the room usable. For a shop, it lets customers see in and staff see out, which matters for trading and for security.
It costs more than plywood and scratches over time, and like plywood it can be removed with effort. It is best for occupied premises where light and visibility are important, not for long-term vacant buildings.
Steel security screens and doors
Perforated steel screens are made for empty buildings. They are bolted into the window reveal or frame using fixings that are difficult to undo from outside, and the perforations let some light and air through, which helps reduce damp and condensation in a closed-up building. Steel security doors with robust locks replace the front and back doors, giving authorised access to agents, contractors and inspectors.
Screens are usually hired rather than bought. Typical charges start from around £25 per screen per week, plus installation and removal, and minimum hire periods often apply. Over a vacancy of several months, the hire cost is often small compared with the cost of stripped copper pipes, squatters or a fire. Many insurers of unoccupied property specify minimum security, so check the policy conditions.
- Bolted fixings that resist removal from outside.
- Perforations allow light and ventilation.
- Do not burn like timber boarding.
- Matching steel doors allow controlled access.
- Hired by the week with fitting and removal charged separately.
Side-by-side comparison
The table compares the three main options on the points property owners usually weigh up. Prices are typical UK guide prices for 2026 and depend on the number, size and height of openings.
| Option | Best for | Light | Typical cost |
|---|---|---|---|
| Exterior plywood | Short-term emergency securing | None | £120–£220 first window, daytime |
| Polycarbonate sheet | Occupied homes and shops awaiting glass | Good | More than plywood |
| Steel screens | Empty property for weeks or months | Some, through perforations | from £25 per screen per week plus fitting |
Choosing the right protection
Start with how long the building will be exposed. If a glazier can fit new glass within a week, plywood or polycarbonate is enough. If the property is going to be empty for a probate sale, a refurbishment or a redevelopment, steel is usually the better value. Then consider who uses the building. Occupied homes need light and a way out in a fire, while a vacant warehouse needs to keep people out above all else.
For commercial and multi-occupied buildings, check fire safety before anything is fixed. In non-domestic premises in England and Wales, the Regulatory Reform (Fire Safety) Order 2005 means boarding must not block fire exits or escape routes while the building is in use. Waste glass and old boarding from commercial premises is controlled waste, so whoever takes it away should hold a waste carrier registration.
Fitting standards that make the difference
Whatever material is chosen, the fixing is what decides whether it works. Plywood screwed only into a rotten or damaged frame can be pulled away by hand, so experienced operatives fix into sound timber or into the masonry reveal, and on larger openings add timber battens behind the sheet to stiffen it. Screw heads on the outside of a sheet are easy to undo, which is why security boarding often uses fixings from inside, coach bolts through a backing batten, or anti-tamper screws.
Steel screens rely on a frame that clamps into the reveal and on fixings that cannot be reached once the screen is in place. A screen that rattles or leaves gaps at the edges is an invitation to pry. When a provider leaves, check every opening yourself, ask for a list of what was fitted, and keep the keys to any steel doors somewhere safe and recorded, because lost keys on a vacant building can mean a costly call-out to regain access.
- Fix into sound timber or masonry, never just a damaged frame.
- Use battens to stiffen large sheets.
- Choose fixings that cannot be undone from outside.
- Check edges for gaps after fitting.
- Record and secure keys for steel doors.
Questions people also ask
How thick should plywood boarding be?
Emergency boarding normally uses exterior-grade plywood in a thickness chosen for the size of the opening and the level of security needed, with thicker sheets for larger openings and ground-floor windows. Just as important as thickness is fixing it securely into the frame or masonry reveal so it cannot be levered off easily.
Can I buy steel security screens instead of hiring them?
Some suppliers sell them, but most owners hire because vacancies are temporary and the supplier handles fitting, removal and any repairs. Hiring from around £25 per screen per week makes sense for weeks or months. For very long vacancies, it is worth comparing the total hire cost with purchase and fitting.
Do steel screens damage the window frames?
Screens are fixed into the reveal or frame with bolts, so some fixing holes are left when they are removed. On a property that will be refurbished, this is usually not a concern. If frames are being kept, ask the installer how they will fix the screens and what making good is needed afterwards.
Written and checked by the Emergency Boarding Up team. Read our editorial policy.
More guides
How Much Does Emergency Boarding Up Cost in the UK? 2026 Prices
A daytime emergency call-out with one domestic window boarded typically costs £120–£220 in the UK in 2026, rising to £180–£350 at night, weekends and…
What to Do After a Break-In: A Step-by-Step Checklist
After a break-in, make sure nobody is still inside, then report it to the police and get a crime reference number. Photograph the damage before…
How to Make a Broken Window Safe Until It Can Be Replaced
To make a broken window safe, keep people and pets away, wear thick gloves and eye protection, and remove only loose shards you can reach from the…
How to Secure an Empty Property: A Guide for Owners and Landlords
To secure an empty property, check your insurer's unoccupied property conditions, remove valuables and anything flammable, drain down water where…
Get a free emergency boarding up quote
Tell us what you need and we'll come back with a clear price.
Request a quote